Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

ICS L85 hop up fix

  • Please log in to reply
No replies to this topic




  • Moderators
  • PipPipPipPipPip
  • 4441 posts

  • Guns: WE L85A2
    WE Glock 17 Gen4

  • Loadouts: Contemporary British Army,
    Light weight belt set up,
    CBA Loadout (Jeans, hoody etc.)

  • Sites: Regular site: Skirmish Airsoft, Mansfield.
    Visited: The Stan, Anzio, The Asylum, Brit-Tac Woodland, Tac-House, Free Fire Zone, Welbeck Academy, the list grows.
    See my YouTube channel for footage.
Thought of this last night and it works a treat so I thought I'd share http://www.airsoft-f..._DIR#/smile.png

So, anyone with an ICS L85 that's taken it to pieces may have stumbled across the hop system, more than likely in fact.

Anyway, the mechanism involves the nub being pushed down by a plastic arm, this arm has a pivot in the middle and a spring at the opposite end to the nub and the spring is meant to insure that the arm is in constant contact with the nub. If you buy a new rubber like I've done however, you might find out of the box the rubber is quite a lot harder than the standard one and that the spring is the crappest spring ever and just doesn't push hard enough for the hop adjustment to actually work.

Now, there are two fixes for this, one is to find another spring, I've searched everywhere but I don't think there's another spring on this earth that's small and strong enough to fit the job.
The other, devised by me only last night, is to use an elastic band.

Instead of using a pushing force on the spring end of the hop arm, use a pulling force on the nub end, between the nub and the pivot pin.
Just wrap the band two or three times around the whole unit making sure it wraps over the hop arm ahead of the pivot pin.

Sometimes, if you need to have the hop on a lot, it might still fail to do the job well enough, but if that's the case, you ought to be able to see the elastic band by looking into the mag well once the gun's fully assembled. Just give that a tug with an allen key or something else hook shaped and the problem's solved.

You can all thank me later.

Need AEG parts? Click here >> Major Airsoft! << Discount code Bullet4MyEnemy for 10% off. 


Find me on YouTube: Bullet4MyEnemy
Airsoft News & Review site: www.AirsoftOperator.com

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users