Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Posted 07 February 2010 - 08:33 PM
Posted 07 February 2010 - 08:38 PM
If that doesn't losen things up a bit, it will be a mech problem and I'd consult a specialist/Local airsoft store.
Send the doctors home, I'll be doing the operating around here.
Resident Patrol Base Techy, any questions about PB, message me and I'll do my best to answer.
Posted 07 February 2010 - 09:32 PM
I assume it's the same trigger mechanism. To fix mine. I took the front end off. (Using the simple one button out and pull off)
Then you can see the trigger's spring. I was messing around with it trying to jam the trigger back out and fix the spring when two little plastic things shot out. The trigger is now absolutely amazing. Better than when it was new. So I don't know what those little plastic things where for. But there you go.
I don't have any pictures as it happened so long ago. And I didn't keep the problem causers. Just try taking the front end off and having a look at the trigger spring. You might be able to figure it out.
Posted 21 April 2010 - 12:02 PM
Posted 24 April 2010 - 08:11 AM
Posted 19 April 2011 - 07:28 AM
OK finally managed to take the ###### thing apart, and after two full days of usage, it had aquired about 15 BBs in the body. Surely that's not right, right? Took the gun in half, shook the body upside down a bit and loads came out. Think there's still one floating about by the trigger, but I don't really fancy taking all the screw out as I don't know hpw much damage I could cause. The trigger seems to be a bit looser, but does anyone know why so many BBs would get inside the body?
if the bbs are goin inside the back of the guns body then you need to look at the rear of the magwell, there will be a gap just sitck some foam in there and that should stop it, a firend of mine has had the same problem. hope this helps
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users