Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

What upgrades does the Snow Wolf M24 take?


  • Please log in to reply
6 replies to this topic

#1
Sam Shaw

Sam Shaw

    AF-UK Newbie

  • Members
  • Pip
  • 9 posts

  • Guns: JG G36C
http://www.actionhob...d-OD_AZK4W.aspx

#2
M_P

M_P

    AF-UK Addict

  • Members
  • PipPipPipPipPip
  • 7085 posts
I'd assume claastic army m24 parts

#3
Rock-climby-Dave

Rock-climby-Dave

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 2373 posts
Sadly not - It's a mish-mash of various sniper parts and it is going to be a case of opening it up to find out exactly what is compatible with what system.

As far as I am aware it is mostly VSR and APS2 parts.

Send the doctors home, I'll be doing the operating around here.

 

Resident Patrol Base Techy, any questions about PB, message me and I'll do my best to answer.


#4
dazz

dazz

    AF-UK Regular

  • Members
  • PipPipPip
  • 130 posts
They are APS2 parts. Same parts as L96.

Not VSR.

#5
dazz

dazz

    AF-UK Regular

  • Members
  • PipPipPip
  • 130 posts
APS 2 Type 96 Cylinder and Triger mech Internals (Same as i.e. Warrior L96).

The hop unit is a hybrid between the L96 and VSR sytle. It is the same hop unit found in the Snow Wolf M99. There is a lever on the side of the outer barrel to allow easy adjustment of the hop.

The cylinder itself is the same diametre as APS2 however the area which the cocking lever attaches is not the same so you cant swap cylinders with that of an L96 for instance.

#6
dazz

dazz

    AF-UK Regular

  • Members
  • PipPipPip
  • 130 posts
field tested this today, running sweet.

Will advise to use an AEG soft nub in the hop if you wish to use BBs of 0.36 or higher.

#7
Weeksy

Weeksy

    AF-UK Newbie

  • Members
  • Pip
  • 5 posts

  • Guns: G&P Magpul Moe M4
    A&K Dragunov (custom)
    Cyma M4 CQB

  • Loadouts: Magpul M4 Moe, 3x 450 h-cap, 1x 300 h-cap, 1x 120 PMAG
    Webtex assault vest
    Mtp Ubacs and Trousers

  • Sites: Close-Action.co.uk
There is a free upgrade available to these guns and the vsr range. What you do is remove your cylinder from your gun, which is simple to do. Once your cylinder is removed from your gun, remove your cylinder head and you should see a plastic tube sticking out, going into the cylinder head itself. This is called the airbreak. I cut this off completely and then sanded it down to a smooth finish. By doing this I noticed I gained around 50-70 fps. This is a nice, cost free and consistent upgrade.

I hope this helped. :D




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users