Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Upgrading Well MB-01 (L96)


  • Please log in to reply
6 replies to this topic

#1
Liam Porter

Liam Porter

    AF-UK Addict

  • Supporters
  • PipPipPipPipPip
  • 1368 posts

  • Guns: -
    Well MB-01 (L96)
    TM Glock 17
    G&P M16A3 with RIS Kit

  • Loadouts: -
    Woodland DPM
    Viper Leg Holster (black)
    Viper LA SF Vest (Black)

  • Sites: -
    Free Fire Zone (FFZ)
    Modern Airsoft Warfare (MAW)
    Urban Assault (UA)
Looking to further upgrade my sniper rifle, currently I've done the barrel, hop unit and rubber.
Currently has these parts installed; barrel, hop unit and hop rubber and nub.

Got one problem at the moment, which is when I turn the hop down as far as possible, .40g BBs are still going far too high (this is similar to my M4's problem....). The rubber's barely been used and is an AEG one, had under 100 shots through it, so is it just that it needs wearing in? If so, how many shots roughly to sort it?
And will increasing the FPS from 430 to 490 (using same weight ammo) mean there will be less hop on the BB?

Now back to upgrading, I'm upgrading to near 500 FPS with these parts; piston, spring, spring guide, cylinder and cylinder head.
The stock trigger system is plastic, and the outer casing has already started to crack, which I have super glued today, so I'll be needing a new one soon. I really don't want to spend 170~ on a LayLax one, and I know King Arms do a cheaper one (100~). But I can't find it anywhere, Wolf Armouries used to have it, but it seems to have disappeared, anyone know where I can get one?
Also, is the King Arms one any good, or will it disintegrate with 500~ FPS?


Thanks a lot.

#2
Nutster

Nutster

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 1117 posts

  • Guns: Primary - ICS L119A1
    Secondary - TM P226
    - KWA G19

  • Loadouts: Paraclete SOHPC/belt kit
    Crye UKSF ubacs
    Crye UKSF trousers
    Oakley boots
    Mechanix gloves

  • Sites: MAW Melton Mowbray
Pm dazz, I reckon he'll have the best advice ;)

 

How do we get dev to appear, Rub a magic lamp ? :P

20362248004a9c0a9ee9e46.gif

https://instagram.com/hazeldine/


#3
Liam Porter

Liam Porter

    AF-UK Addict

  • Supporters
  • PipPipPipPipPip
  • 1368 posts

  • Guns: -
    Well MB-01 (L96)
    TM Glock 17
    G&P M16A3 with RIS Kit

  • Loadouts: -
    Woodland DPM
    Viper Leg Holster (black)
    Viper LA SF Vest (Black)

  • Sites: -
    Free Fire Zone (FFZ)
    Modern Airsoft Warfare (MAW)
    Urban Assault (UA)
Good idea, as I'm getting parts from his site.. now why couldn't I think of that :huh:

#4
TPI

TPI

    AF-UK Addict

  • Supporters
  • PipPipPipPipPip
  • 2428 posts

  • Loadouts: GroundBreaker

  • Sites: Highland Tactical Airsoft
I saw something on airsoft world fo the trigger unit if you want to check them out

I'm Craig, God's Boss!
FeedBack

#5
Liam Porter

Liam Porter

    AF-UK Addict

  • Supporters
  • PipPipPipPipPip
  • 1368 posts

  • Guns: -
    Well MB-01 (L96)
    TM Glock 17
    G&P M16A3 with RIS Kit

  • Loadouts: -
    Woodland DPM
    Viper Leg Holster (black)
    Viper LA SF Vest (Black)

  • Sites: -
    Free Fire Zone (FFZ)
    Modern Airsoft Warfare (MAW)
    Urban Assault (UA)
Thanks a lot! Could be what I get, unless I find a King Arms in stock in the UK in the next few days!

#6
Allghilliedup

Allghilliedup

    AF-UK Newbie

  • Members
  • Pip
  • 1 posts
I have just bought the Well L96 and I was just wondering if anyone can tell me how to remove the reducer? I know it's in the bolt but... That's all I know! All replys will be much appreciated

#7
Liam Porter

Liam Porter

    AF-UK Addict

  • Supporters
  • PipPipPipPipPip
  • 1368 posts

  • Guns: -
    Well MB-01 (L96)
    TM Glock 17
    G&P M16A3 with RIS Kit

  • Loadouts: -
    Woodland DPM
    Viper Leg Holster (black)
    Viper LA SF Vest (Black)

  • Sites: -
    Free Fire Zone (FFZ)
    Modern Airsoft Warfare (MAW)
    Urban Assault (UA)
You need the large Allen key that came with the gun and a small-ish flat head screw driver.

Before you start, make sure the gun is not cocked.

1 - remove the cheek rest. This is done by loosening the two larger Allen screws on the right side of the stock.
2 - remove the spring guide stopper. This is done by putting your thumb in front of the trigger and pushing down on the curved piece of metal. It may require quite a lot of force, but will pop out and part will stick out the bottom of the gun.
3 - remove the bolt. Just go to cock the gun as you would normally, but the stopper won't catch the spring, so the bolt should slide straight out.
4 - remove the reducer. Unscrew the small brass piece in the end of the cylinder head. This is the reducer.
5 - put the bolt and spring guide stopper back. Put the bolt back as it was, you need to use a screwdriver to push down the little bit sticking up to get it go in properly. Then push the spring guide stopper back up until it clicks into place, which may require some force.
6 - put the cheek rest back on. Put it in place and tighten the screws - don't do them too tight or they get stuck and the nut cracks the plastic of the stock - like mine has.

Hope this makes some sense, it should do if you have the gun there.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users