Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

How to mod an AGM XM8


  • Please log in to reply
3 replies to this topic

#1
Nutster

Nutster

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 1117 posts

  • Guns: Primary - ICS L119A1
    Secondary - TM P226
    - KWA G19

  • Loadouts: Paraclete SOHPC/belt kit
    Crye UKSF ubacs
    Crye UKSF trousers
    Oakley boots
    Mechanix gloves

  • Sites: MAW Melton Mowbray
If any of you have used an AGM XM8 you will know that the stock 'sight' is shite to be honest, so here is my quick guide on how to put a decent red dot into your version of the AGM XM8.
First of all you need to find a red dot that you think will fit i got this one off eBay for around 20

Posted Image

Then you need to remove the the standard sight from the gun, to do this you need to carefully take the body pins from the front and back of the gun and then slide off the front hand guard and stock

Posted Image
Posted Image

once you have done this you should have something that looks like this, you then need to remove this pin (circled)

Posted Image
Posted Image

now the upper receiver should pull up and towards the stock end of the gun and you should be left with this

Posted Image
Posted Image

 

How do we get dev to appear, Rub a magic lamp ? :P

20362248004a9c0a9ee9e46.gif

https://instagram.com/hazeldine/


#2
Nutster

Nutster

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 1117 posts

  • Guns: Primary - ICS L119A1
    Secondary - TM P226
    - KWA G19

  • Loadouts: Paraclete SOHPC/belt kit
    Crye UKSF ubacs
    Crye UKSF trousers
    Oakley boots
    Mechanix gloves

  • Sites: MAW Melton Mowbray
Next you need to unscrew this screw (circled)

Posted Image

which will allow you to separate the two sides of the upper receiver
like so

Posted Image

Posted Image

then you slide the carry handle down from the 'scope'

Posted Image

you should now have this bit

Posted Image

 

How do we get dev to appear, Rub a magic lamp ? :P

20362248004a9c0a9ee9e46.gif

https://instagram.com/hazeldine/


#3
AshotNinja

AshotNinja

    AF-UK Newbie

  • Members
  • Pip
  • 19 posts

  • Guns: Anything american issued...

  • Loadouts: Arpat all the way
check this badboy out... its a one of a kind XM8 LMG

it started life as the old AWS xm8 kit for a g36, added the g36 doner insides... pimped gearbox, lipo batteries...

gutted the lame optics and added a 4x16 M16 carry handle scope ...

added side and bottom rails, VLTOR legs , psg1 tightened barrel and barrel extension with flashider

and finished with a paintjob by me.


Posted Image

#4
lukeyboy96

lukeyboy96

    AF-UK Starter

  • Members
  • PipPip
  • 58 posts

  • Guns: ICS M4
    SRC G36C Gen II
    SRC G36MG Gen II
    SA1 Sniper Rifle
    G&G EGM MP5A4
    Double Eagle Sig 552

  • Loadouts: British DPM Combats
    Viper SA Vest DPM

check this badboy out... its a one of a kind XM8 LMG

it started life as the old AWS xm8 kit for a g36, added the g36 doner insides... pimped gearbox, lipo batteries...

gutted the lame optics and added a 4x16 M16 carry handle scope ...

added side and bottom rails, VLTOR legs , psg1 tightened barrel and barrel extension with flashider

and finished with a paintjob by me.


Posted Image



That is SICK !!!
Русский язык является языком для богов




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users