Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Borked GBB M4 Bolt

  • Please log in to reply
1 reply to this topic



    AF-UK Newbie

  • Members
  • Pip
  • 1 posts
This started out as a stock AGM M4 GBB - internally, it mostly still is - with the exception of the inner barrel. Externally, almost everything has been replaced with G&G gear (marketed as being compatible with AGM), and I had it put together by the guys at Land Warrior (so as to remove the possibility of me screwing up the internals in the lower receiver.)

So begins my woes - most likely due to my own stupidity. Was testing out the new build, making sure everything cycled correctly, and dry fired the weapon a few times. After about 3 cycles, there was a bang, and the bolt did not return, staying stuck in the rear position. In order to free the bolt, I had to remove the rear stock, and with a sharp tap, the bolt returned. I then was able to field strip the weapon, and upon removing the bolt, it was evident that a large chunk of metal from the inside of the bolt carrier had broken off completely.
A further test showed that the bolt would still become stuck at the rear and would not cycle properly. The bolt moves freely when the charging handle is pulled.

My question here is basically to see if anyone has any ideas what could have caused such force to be exerted on the bolt in such a way that it would break, and what parts I should replace to fix the fault.

Pictures of the bolt carrier showing the broken metal piece below:
Attached File  IMAG0046.jpg   669.15KB   5 downloads
Attached File  IMAG0047.jpg   630.9KB   3 downloads




  • Moderators
  • PipPipPipPipPip
  • 4442 posts

  • Guns: WE L85A2
    WE Glock 17 Gen4

  • Loadouts: Contemporary British Army,
    Light weight belt set up,
    CBA Loadout (Jeans, hoody etc.)

  • Sites: Regular site: Skirmish Airsoft, Mansfield.
    Visited: The Stan, Anzio, The Asylum, Brit-Tac Woodland, Tac-House, Free Fire Zone, Welbeck Academy, the list grows.
    See my YouTube channel for footage.

With my WE M16 related knowledge, I would say it looks like something wasn't seated correctly when you pulled the trigger.

It could be that some parts didn't fit right, they got caught on something or maybe something as simple as the charging handle not being locked in the forward position.
Normal internal pressures could more than likely do that, it's just that they weren't being used in the correct way.

Also, the bolt moving freely sounds like a problem with the buffer tube. It sounds a lot like there isn't even a buffer tube inside the stock.
I must have misunderstood what you meant by "moves freely".

I've never looked into the AGM GBB 'cos I heard it was the worst by far and I think I lack the knowledge to make it workable if I bought one... So I can't say for sure.

Aren't Landwarrior doing anything to help you out? Seems like it was most likely their fault.
Which is bad because I'm planning on buying from them at the end of the month! D=

Need AEG parts? Click here >> Major Airsoft! << Discount code Bullet4MyEnemy for 10% off. 


Find me on YouTube: Bullet4MyEnemy
Airsoft News & Review site: www.AirsoftOperator.com

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users