Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

hop up help


  • Please log in to reply
6 replies to this topic

#1
CES_williamson

CES_williamson

    AF-UK Veteran

  • Members
  • PipPipPipPip
  • 641 posts

  • Guns: ARES M4A1 custom
    TM recoil m4
    custom built 1911
    WE Glock 18c

  • Loadouts: just a normal OD rig using DPM's or MTP's.

  • Sites: finmere
    looking for more.
i have recently bought a g&g gr-16 off zero one airsoft although a good gun i took it apart to have a look at the internals , i took the hop up out and had a look at it i took the barrel out took a rubber short tube off to have a look nothing interesting put it back in and put the hop up back in the gun and reassembled it but after this look at the internals the hop up is not working what did i do ?? pls reply

Owner & CEO of S.W.A.S a new online airsoft retailer!

http://swasairsoft.co.uk/

13096108_1784907025064619_31411891195414


#2
kejot

kejot

    AF-UK Regular

  • Members
  • PipPipPip
  • 231 posts

  • Guns: CA M15CQB, TM 226, TM mk23 socom. All i need!!

  • Loadouts: loads but BFG's the best!!!!

  • Sites: UCAP's
either lost the nib or not lined up the hole in the hop

#3
M_P

M_P

    AF-UK Addict

  • Members
  • PipPipPipPipPip
  • 7085 posts
did you loose a very small clear tube- like a section of the inner part of a biro?
often happens, its called the hop nub

#4
CES_williamson

CES_williamson

    AF-UK Veteran

  • Members
  • PipPipPipPip
  • 641 posts

  • Guns: ARES M4A1 custom
    TM recoil m4
    custom built 1911
    WE Glock 18c

  • Loadouts: just a normal OD rig using DPM's or MTP's.

  • Sites: finmere
    looking for more.
i really dont know ??

Owner & CEO of S.W.A.S a new online airsoft retailer!

http://swasairsoft.co.uk/

13096108_1784907025064619_31411891195414


#5
M_P

M_P

    AF-UK Addict

  • Members
  • PipPipPipPipPip
  • 7085 posts
well could you take it apart again and have a look maybe?
If not, send it to a gun mechanic or gunsmith etc to take a look,

#6
CES_williamson

CES_williamson

    AF-UK Veteran

  • Members
  • PipPipPipPip
  • 641 posts

  • Guns: ARES M4A1 custom
    TM recoil m4
    custom built 1911
    WE Glock 18c

  • Loadouts: just a normal OD rig using DPM's or MTP's.

  • Sites: finmere
    looking for more.
will do thanks for the help :)

Owner & CEO of S.W.A.S a new online airsoft retailer!

http://swasairsoft.co.uk/

13096108_1784907025064619_31411891195414


#7
kejot

kejot

    AF-UK Regular

  • Members
  • PipPipPip
  • 231 posts

  • Guns: CA M15CQB, TM 226, TM mk23 socom. All i need!!

  • Loadouts: loads but BFG's the best!!!!

  • Sites: UCAP's
before you send it away, remove the hop and barrel, look down the barrel hop end and while turning the adjuster see if you can see the hop rubber being pushed down, if u can then thats not your problem and could just be a air seal fault, if you cant strip the hop down again, and see if the nub is in the correct place, it should be on the bottom of the hop arm, also on the barrel is a slot, the hop rubber should only slide on one way due to the groves, but the slot needs to line up with the nub/hop arm




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users