Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

LIPO Help??


  • Please log in to reply
2 replies to this topic

#1
L1ferpr

L1ferpr

    AF-UK Newbie

  • Members
  • Pip
  • 6 posts

  • Guns: Mk12 Mod0 SPR, M4 Sopmod, M4 CQB


  • Loadouts: British DPM

    US ACU\ BDU
Alright, so it's time to get rid of my crane stock. Now that batteries have gotten to the point they can be swallowed without noticing,
I'm looking for a LiPo battery that will replace my 9.6v crane type battery in my M4-CQB by sitting in the stock tube. From what
I can tell I have two options either a 7.4v or a 11.1v. one seems too low and the other seems too high.

about the gun:-

CA M15 CQB upgraded full Systema mechbox with Systema high torque motor
GP cell 9.6V 2300mAh NiMH crane type battery

my questions:-

1.) If I get the 7.4v, will i lose ROF and have my gun sound like its from the hire pile?
2.) If i get the 11.1v, will my gun melt from the voltage?
3.) Will the LiPo 7.4v or 11.1v have the minerals to run the mechbox and motor (the crane i have was one of 3 or 4 i tried before i settled on the GP cell battery)
4.) Is their a better alternative to the 7.4v and the 11.1v e.g a 9.6v that has evaded me?

If anyone can help cheers

L1ferpr

#2
andrew

andrew

    AF-UK Starter

  • Members
  • PipPip
  • 65 posts

  • Guns: m14 camo
    mp5 with ump stock
hi there,

well i can tell your a rof guy like me...

its truly upto you.

i have a kwa m4 system which comes "lipo ready" upto now no problems

genrally higher voltage higher rate off fire eg. a 9.6v gives a 15-20% more rate of fire than a 8.4 but decreases your guns life in the long run that little bit faster

if you want the rate of fire your gun should be able to handle a 11.1 just it wont live aslong as if you used a 8.4 etc if your confident in fixing any problems that may come up then i say go for it.

basically the higher volt = more rof but less life span for the aeg if you think its worth it or are ok with repairing them then i say go for it.

#3
kejot

kejot

    AF-UK Regular

  • Members
  • PipPipPip
  • 231 posts

  • Guns: CA M15CQB, TM 226, TM mk23 socom. All i need!!

  • Loadouts: loads but BFG's the best!!!!

  • Sites: UCAP's
my ca runs on a 7.4 lipo no problems, quick trigger response due to mosfet, but still good rate of fire, as yours is a upgrades gearbox, i would go for a 11.1 and should be no problems, would recommend a mosfet though

also get a charger like a imax b6




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users