Jump to content

Welcome to Airsoft Forums UK
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

KWA SR10 - Spring Change


  • Please log in to reply
5 replies to this topic

#1
Exibit

Exibit

    AF-UK Newbie

  • Members
  • Pip
  • 13 posts
Hi guys

I have KWA SR10 and its to hot for Uk sites as it shoots at 400FPS - I have bought a Systema M100 Spring so I can lower the FPS to around 350 or maybe slightly less

How difficult a job is this for a neewb am I better taking it to a shop and getting them to do it and if so which shop so I can contact them

#2
Matt!

Matt!

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 1290 posts

  • Guns: L119A1

  • Loadouts: DDPM, DPM, OD, TAN
with a gun as expensive as that let a shop to it! it can be expensive but is it worth breaking a 400 gun to save yourself 30?

Posted Image


New To Airsoft? | Transporting RIF's?


{C}
QUOTE (Devastator)
Welcome to the forums :)

#3
Exibit

Exibit

    AF-UK Newbie

  • Members
  • Pip
  • 13 posts
Matt

Thanks for the reply I have had it in bits today but the last hex screw I needed to remove was a problem as I did not have an allen key to fit it, its the hx nut that is in the mag release very small - anyway gun is back together though did not manage to change the spring - What shop would do this change if was to go down that route

Posted Image
Posted Image
Posted Image

#4
Rock-climby-Dave

Rock-climby-Dave

    Moderator

  • Moderators
  • PipPipPipPipPip
  • 2372 posts
any that sell airsoft guns (that are good quality) a normal gun store will not do it unfortuantly.

Send the doctors home, I'll be doing the operating around here.

 

Resident Patrol Base Techy, any questions about PB, message me and I'll do my best to answer.


#5
Exibit

Exibit

    AF-UK Newbie

  • Members
  • Pip
  • 13 posts
I thought I was doing so well got to the final part

Getting the gear box out then came across the smallest hex nut I have ever seen in the mag release

So had to put it all together again - I might have one more try tomorrow when I buy more allen keys

#6
Devastator

Devastator

    Admin

  • Root Admin
  • PipPipPipPipPip
  • 4298 posts
It can be quite easy to round the small ones off, so just be careful when you do it making sure you're pushing down firmly.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users